Experimental investigation on heat transfer behavior of the novel ternary eutectic PCM embedded with MWCNT for thermal energy storage systems

Journal of Thermal Analysis and Calorimetry - In this paper, the variation of thermophysical properties such as the thermal conductivity, thermal energy storage capacity, viscosity, and phase...     

Triphilic pentablock copolymers with perfluoroalkyl segment in central position

Adding perfluoroalkyl (PF) segments to amphiphilic copolymers yields triphilic copolymers with new application profiles. Usually, PF segments are attached as terminal blocks via Cu(I) catalyzed azide-alkyne cycloaddition (CuAAC). The purpose of the current study is to design new triphilic architectures with a PF segment in central position. The PF segment bearing bifunctional atom transfer radical polymerization (ATRP) initiator is employed for the fabrication of triphilic poly(propylene oxide)-b-poly(glycerol monomethacrylate)-b-PF-b-poly(glycerol monomethacrylate)-b-poly(propylene oxide) PPO-b-PGMA-b-PF-b-PGMA-b-PPO pentablock copolymers by a combined ATRP and CuAAC reaction approach. Differential scanning calorimetry indicates the PF-initiator to undergo a solid–solid phase transition at 63°C before the final crystal melting at 95°C. This is further corroborated by polarized optical microscopy and X-ray diffraction studies. The PF-initiator could successfully polymerize solketal methacrylate (SMA) under typical ATRP conditions producing well-defined Br-PSMA-b-PF-b-PSMA-Br triblock copolymers that are then converted into PPO-b-PSMA-b-PF-b-PSMA-b-PPO pentablock copolymer via CuAAC reaction. Subsequently, acid hydrolysis of the PSMA blocks afforded water soluble well-defined triphilic pentablock copolymers PPO-b-PGMA-b-PF-b-PGMA-b-PPO with fluorophilic central segment, hydrophilic middle blocks, and lipophilic outer blocks. The triphilic block copolymers could self-assemble, depending upon the preparatory protocol, into spherical and filament-like phase-separated nanostructures as revealed by transmission electron microscopy.     

Designing spirobifullerene core based three-dimensional cross shape acceptor materials with promising photovoltaic properties for high-efficiency organic solar cells

The development of organic electron acceptor materials is one of the key factors for realizing high-performance organic solar cells (OSCs). Nonfullerene electron acceptors, compared to traditional fullerene acceptor materials, have gained much impetus owing to their better optoelectronic tunabilities and lower cost, as well as higher stability. Therefore, 5 three-dimensional (3D) cross-shaped acceptor materials having a spirobifullerene core flanked with 2,1,3-benzothiadiazole are designed from a recently synthesized highly efficient acceptor molecule SF(BR) ₄ and are investigated in detail with regard to their use as acceptor molecules in OSCs. The density functional theory (DFT) and time-dependent DFT (TDDFT) calculations have been performed for the estimation of frontier molecular orbital (FMO) analysis, density of states analysis, reorganization energies of electron and hole, dipole moment, open-circuit voltage, photo-physical characteristics, and transition density matrix analysis. In addition, the structure-property relationship is studied, and the influence of end-capped acceptor modifications on photovoltaic, photo-physical, and electronic properties of newly selected molecules ( H1-H5 ) is calculated and compared with reference ( R ) acceptor molecule SF(BR) ₄ . The structural tailoring at terminals was found to effectively tune the FMO band gap, energy levels, absorption spectra, open-circuit voltage, reorganization energy, and binding energy value in selected molecules H1 to H5 . The 3D cross-shaped molecules H1 to H5 suppress the intermolecular aggregation in PTB7-Th blend, which leads to high efficiency of acceptor material H1 to H5 in OSCs. Consequently, better optoelectronic properties are achieved from designed molecules H1 to H5 . It is proposed that the conceptualized molecules are superior than highly efficient spirobifullerene core-based SF(BR) ₄ acceptor molecules and, thus, are recommended to experiments for future developments of highly efficient solar cells.     

Structure and morphology of laser-ablated WO3 thin films

The structure and surface morphology of WO₃ thin films deposited by a laser-ablation technique have been found to be strongly dependent on the deposition conditions and the nature of the substrate. By precisely controlling the substrate temperature and the oxygen partial pressure, amorphous, polycrystalline, nano-crystalline and iso-epitaxial WO₃ thin films were successfully grown. The structure and surface morphological features of the films from X-ray diffraction and atomic force microscopy data are described in relation to the deposition conditions. PACS 81.15.Fg; 68.55.-a; 68.37.Ps     

Near-optimal design of Global Positioning System (GPS) networks using the Tabu Search technique

This paper describes an optimization technique based on an heuristic procedure which is applied to analyse and improve the efficiency of the design of Global Positioning System (GPS) surveying networks. GPS is a valuable survey tool because of its ability to increase the accuracy, speed and flexibility of a survey. A GPS network can be defined as a number of stations, which are co-ordinated by a series of sessions, formed by placing receivers on stations. The goal is to select the best order in which these sessions can be organised to give the best possible schedule. Generally, solving large networks to optimality requires impractical computational time. This paper proposes a Tabu Search technique which provides optimal or near-optimal solutions for large networks with an acceptable amount of computational effort. Computational results for several case studies with known and unknown optimal schedules have been presented to assess the performance of the proposed technique.     

Heavy metal ion uptake properties of polystyrene-supported chelating polymer resins

Metal ion uptake properties of polystyrene-supported chelating polymer resins functionalized with (i) glycine, (ii) hydroxy benzoic acid, (iii) Schiff base and (iv) diethanol amine have been investigated. The effects of pH, time and initial concentration on the uptake of metal ions have been studied. The uptake of metal ion depends on pH. The resins are more selective at pH 10 for Pb(II) and Hg(II), whereas at pH 6 they are found to be Cd(II) and Cr(VI) selective. Metal ion uptake properties of resins follow Freundlich’s equation. The resins are recyclable and are therefore employed for the removal of heavy metal pollutants from industrial waste water.     

Synthesis and characterization of some oxodiperoxo molybdenum(VI) complexes of Morpholinomethyl urea and related ligands

The oxodiperoxo complexes of Mo(VI) of the type [MoO(O₂)₂L], where L = Morpholinomethyl urea, morpholinomethyl thiourea, piperidinomethyl urea, piperidinomethyl thiourea, pyrrolidinomethyl urea, and pyrrolidinomethyl thiourea have been synthesized and characterized by elemental analysis, molar conductance, IR, UV-Vis, and TGA/DTA techniques. It is shown that the ligands coordinate to the metal ion in a symmetrical bidentate fashion through heterocyclic nitrogen and carbonyl oxygen or thiocarbonyl sulfur. Thermal studies indicate continuous weight loss until a stable oxide is formed. The text was submitted by authors in English.     

A new class of isoquinoline alkaloids: The indenobenzazepines

The dark yellow indenobenzazepine alkaloids lahorine ($\text{1}$) and lahoramine ($\text{2}$) have been found in $\text{Fumaria}$$\text{parviflora}$ Lam. (Fumariaceae). In a transformation with biogenetic implications, treatment of the spirobenzylisoquinolines dihydrofumariline ($\text{4}$) and dihydroparfumidine ($\text{7}$) with methanesulfonyl chloride and triethylamine in dry THF, followed by iodine oxidation, provided $\text{1}$ and $\text{2}$, respectively.     

The role of various binding materials for trace elemental analysis of powder samples using laser-induced breakdown spectroscopy

Study of various binding materials like potassium bromide, poly(vinyl alcohol), starch, silver and aluminum has been carried out using laser-induced breakdown spectroscopy (LIBS). The role of matrix effects using these five binders on LIBS signal intensity was investigated for better performance of LIBS technique as a quantitative analytical tool. For comparative study of different binders, the signal intensity of different Mg lines at 518.3, 517.2, 383.8 and 279.5 nm wavelengths were recorded for pellets prepared with known concentrations of Mg in these binders. The influence of laser energy on ablated mass under different binding materials and its correlation with LIBS signal intensity has been explored. Optical scanning microscopy images of the ablated crater were studied to understand the laser ablation process. The study revealed that the binding material plays an important role in the generation of LIBS signal. The relative signal intensity measured for a standard Mg line (at 518.3 nm) were 735, 538, 387, 227 and 130 for potassium bromide, starch, poly(vinyl alcohol), silver and aluminum as binders, respectively. This indicates clearly that potassium bromide is better as a binder for LIBS studies of powder samples.